Nano (NANO)

Before you start 

Verify you have:

  • a Ledger Nano S;
  • Windows 7+, macOS 10.8+ or Linux;
  • a USB port. Use an adapter for USB-C ports;
  • Google Chrome / Chromium installed.


Install the Nano app

  1. Launch the Ledger Manager.
  2. Connect and unlock your device using your PIN code. 
  3. Find Nano in the list on the APPLICATIONS tab.
  4. Click on the green arrow button.
  5. Press the right button on your device when asked: Allow Ledger Manager? 
  6. Verify that the application is correctly installed on your device by viewing its icon on the dashboard.

Note: Check the solutions in this article if the device displays Unable to install application. 


Set up NanoVault

  1. Connect and unlock your device with your PIN code.
  2. Launch the NanoVault in your browser.
  3. Click Import an existing wallet.
  4. Click import type and select Ledger Nano S from the dropdown.
  5. Make sure your Ledger device is detected and your account address is imported into NanoVault.

Note: Make sure your Ledger device is unlocked with the Nano application open. Press the button to re-check the status of your Ledger after opening the Nano application if needed.


Use NanoVault

Was this article helpful?
47 out of 64 found this helpful